Product ID:PENNZOIL PREMIUM TWO-CYCLE OIL
MSDS Date:01/01/1987
FSC:9150
NIIN:00F005124
MSDS Number: BBRTZ

Emergency Phone: (713) 236-6070

Cage: 83589

Telephone: 713-236-6070/713-546-8512

Cage: 83589

NON-HAZARDOUS FOR INGREDIENTS

Fraction By Weight: 100%

Effects of
Overexposure:IRRITATION/DERMATITIS/DIZZINESS/DROWSINESS/PNEUMONIA/C
OMA/EYE AND SKIN IRRITATION.

First Aid:EYES: FLUSH W/WATER FOR 15 MINUTES. SKIN: REMOVE ALL
CONTAMINATED CLOTHING. WASH W/SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. IF BREATHING HAS STOPPED, APPLY ARTIFICIAL RESP/OXYGEN.
INGESTION: DON 'T INDUCE VOMITING. SEEK MEDICAL ATTENTION.

Flash Point:135F (TCC)
Lower Limits:1.0%
Upper Limits:10%
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER MAY COOL CONTAINERS EXPOSED TO HEAT OR
FLAME.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHEN
BURNING.

Spill Release Procedures:ABSORB LARGE SPILLS WITH DRY SAND OR ABSORBANT
MATERIALS. CLEAN SPILL AREA WITH DETEENT SOLUTIONS. PROVIDE
ADEQUATE VENTILATION DURING CLEAN-UP.

Handling and Storage Precautions:STORE IN SEALED CONTAINERS AWAY FROM
HEAT/OPEN FLAME/OXIDIZING MATERIALS. FIRE EXTINGUISHERS MT BE KEPT
READILY AVAILABLE/PERSONNEL TRAINED.
Other Precautions:DO NOT TRANSFER TO UNMARKED CONTAINERS. FOLLOW DOT
REGULATIONS DURING TRANSPORT. PROPRIETARY CHEMICALS OBTAINED FROM
VARIOUSANUFACTURERS ARE ADDED TO THIS PRODUCT.

Respiratory Protection:MIST: HALF-MASK OR FULL PIECE RESP W/CARTRIDGE
FILTER.
Ventilation:PROVIDE ADEQUATE VENTILATION TO KEEP BELOW TLV.
Protective Gloves:RUBBER
Eye Protection:FACE SHIELD/SAFETY GOGGLE
Other Protective Equipment:WASH HAND/FACE W/SOAP & WATER BEFORE SMOKING
AND EATING.
Supplemental Safety and Health
MSDS DATE: MARCH 83.

Boiling Pt:B.P. Text:300F
Vapor Pres:10
Vapor Density:4-5
Spec Gravity:0.875
Solubility in Water:SLIGHT
Appearance and Odor:GREEN-BLUE COLOR; LUBE OIL ODOR

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO, CO2, SMOKE FROM COMBUSTION

Waste Disposal Methods:WASTE MATERIALS SHOULD BE DUMPED OR BURNED IN AN
APPROVED INDUSTRIAL WASTE LAND FILL. LARGE QUANTITIES MAY BE
DISPOSED OF BY INCINERATION IN A SUITABLE COMBUSTION CHAMBER.
DISPOSAL MUST COMPLY WITH AL L FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.